Perth cost guide

Bathroom renovation cost in Perth

A mid-range main bathroom in Perth typically costs $16,000 to $22,000. Here is where the money goes, what moves the price, and the costs people forget.

Updated October 2026 · Indicative Perth metro prices, GST included

What a bathroom renovation costs in Perth

For a typical main bathroom of 6 to 8 m², keeping the same layout and using licensed trades, these are realistic ranges before you add a buffer for surprises:

BudgetMid-rangePremium
Main bathroom (6 to 8 m²)$11k to $15k$16k to $22k$30k to $50k
Ensuite$9k to $13k$14k to $20k$20k to $42k

Budget means clean and functional with standard fixtures. Mid-range means quality tiles and tapware and a good vanity. Premium means floor-to-ceiling feature tiling, custom joinery and designer fixtures.

A real Perth bathroom, line by line

This is a fully costed mid-range main bathroom in a 1970s brick home, 6.5 m², same layout. The final range for the job was $16,000 to $19,500.

ItemWhoCost
Strip-out and skip binDIY possible$1,450
Plumbing (rough-in and fit-off)Licensed trade$2,780
ElectricalLicensed trade$1,240
Waterproofing to AS 3740Trade$980
Wall and floor tilingDIY possible$3,760
Vanity and benchtopSupply$1,980
Bath, shower screen and toiletSupply$2,180
Screed, plaster, paint and fittingsTrade$3,305
Indicative total$17,675

Add a buffer of 15% for a home built before 1990, because old pipes, wiring and wall condition only show up once the walls are open.

What moves the price most

Costs people forget

WA rules worth knowing

  • For home building contracts of $7,500 to $500,000, the deposit can't be more than 6.5% of the contract price, and the contract must be in writing. More on WA deposits.
  • If the work needs a building permit and is worth more than $20,000, it must be done by a registered builder (or an approved owner-builder), and home indemnity insurance applies.
  • Electrical, gas and plumbing work must be done by licensed trades, who should give you compliance certificates.

General information only. Confirm current rules with Building and Energy (WA Government) or a lawyer.

Common questions

How much does a bathroom renovation cost in Perth?

Most mid-range main bathrooms of 6 to 8 m² cost $16,000 to $22,000 with licensed trades and the same layout. Budget jobs start from about $11,000 and premium bathrooms run $30,000 to $50,000. Add a 10 to 20% buffer for surprises.

How long does a bathroom renovation take?

A standard bathroom usually takes three to six weeks once work starts, depending on trade availability, waterproofing cure times and how quickly fixtures arrive. Order long-lead items like vanities and screens early.

Which parts can I do myself?

Many owners do the strip-out, painting and sometimes tiling to save money. Plumbing and electrical work must be done by licensed trades, and waterproofing should be done and certified by a qualified waterproofer.

Is $10,000 enough for a bathroom?

It can cover a cosmetic refresh where you keep the layout and some fixtures. A full strip-out and rebuild of a main bathroom usually starts at around $11,000 in Perth.

How do I compare bathroom quotes?

Make sure every quote prices the same scope: tiling area, tile allowance, waterproofing, screen, fixtures and who removes the waste. Renova's free quote checker flags what's missing or too vague in any quote.

Free plan

Get a plan for your bathroom

Answer a few questions and Renova builds a plan for your home: a low, base and high cost, the order of works, what you can DIY, and the risks to watch.

More guides